Image of Jeremy L. Gaddis, CCNA, CCNP (and Cortney, in case you were wondering)

LAB: Setting the Hostname

by Jeremy L. Gaddis on September 10, 2011 · 1 comment

Post image for LAB: Setting the Hostname

Objective

It is important that we assign meaningful hostnames to our routers and switches. In this lab, you’ll demonstrate that you can successfully configure the hostname on a device.

Topology

You may use any router or switch to complete this exercise. It does not need to be connected to any other devices.

Task 1

Establish a console connection to your device.

Task 2

Depending on the type of device you’re using, set it’s hostname to either “core-router” or “core-switch”.

Task 3

Verify that the CLI prompt has changed and now shows the new hostname.

Image Source

  • Felixmthw

    Good Info

Previous post:

Next post: